Skip to content
VogeManuals
Service

Voge SR450X maintenance schedule and service intervals

The SR450X service plan: first service at 1,000 km, then every 6,000 km or six months, with the intervals for oil, filters, spark plug, belt, brake fluid and coolant.

3 min readDifficulty: Easy

Parts

  • Engine oil, SAE 10W-40 SL or higher
  • Oil filter
  • Spark plug LMAR8J-9E
  • Air filter element

The SR450X has its first service at 1,000 km. After that it is serviced every 6,000 km or every six months, whichever comes first. The intervals below come from the maintenance table in the Turkish owner manual and from the Loncin LX400T-A service manual.

The Turkish owner manual is a machine translation, and part of its table is printed out of line with the kilometre columns. Items whose interval cannot be read with certainty are listed separately rather than guessed.

Service intervals

When Replace Check, clean or lubricate
1,000 km (first service) Engine oil, oil filter Oil level, fuel lines, coolant level, intake seals, brake lines, brake fluid level, brake light switches, evaporative system, shock absorbers for leaks, air filter
Every 6,000 km or 6 months (7,000, 13,000, 19,000 km and so on) Engine oil, oil filter, fuel filter Everything above, plus the variator rollers and battery voltage; lubricate the wheel bearings, stand pivots, pillion footrest pivots, front brake lever pivot and swingarm bearing; adjust the throttle cable
Every 12,000 km (13,000, 25,000, 37,000 km) Spark plug, air filter element Fuel pump element
7,000, 19,000 and 31,000 km - Check the spark plug, clean the air filter element
Every 2 years Brake fluid, coolant -
37,000 km Throttle cable -

Belt and rollers: follow the service manual

The owner manual table marks belt replacement at several services after 7,000 km, but those marks are not aligned with the kilometre columns. The service manual is explicit: the drive belt and the weight rollers are inspected and cleaned every 5,000 km or five months, and the belt is replaced at 10,000 km at the latest. The wear limits and the procedure are in SR450X CVT belt and variator service.

Items to confirm with a dealer

The table also lists these items, but their marks are misprinted in the Turkish edition. Their timing is best confirmed with a Voge dealer:

  • Valve clearance (intake 0.18 mm, exhaust 0.28 mm)
  • Cleaning the throttle body, the CVT chamber and the breather screen
  • Crankcase breather hose
  • Ramp plate slider
  • Steering bearing lubrication

Fluids and parts at a glance

Item Specification
Engine oil SAE 10W-40, API SL or higher; 5W-40 or 0W-40 in winter
Oil quantity 1.7 L with a new filter, 1.6 L without
Coolant 1.3 L
Spark plug LMAR8J-9E, gap 0.8-0.9 mm
Drive belt 1004 x 27 x 13.4 mm, 28 degree angle
Battery 12 V 10 Ah
Tyre pressure, rider only Front 2.2 bar, rear 2.4 bar
Tyre pressure, with passenger Front 2.4 bar, rear 2.6 bar
Oil drain bolt / oil filter 22 Nm / 11 Nm

Every tightening torque for the SR450X is on the SR450X torque specifications page. The owner manual and the service manual can be downloaded from their pages, and model data is on the SR450X page.

Source

Information only, not official Voge documentation. Verify every figure in the official manual for your exact model and model year before you work on the bike.

Related reading

GuideDS900XDS800X Rally

Buying a used Voge: the checklist, with model-specific points

What to check before buying a second-hand Voge: papers and service stamps against the factory schedule, recalls, a cold start, chain, brakes, tyres and steering, and the known weak points of each model.

3 min read
ServiceSR450X

Voge SR450X CVT belt and variator service

How often the SR450X drive belt and rollers are inspected, the wear limits from the Loncin service manual, the removal order and the three pulley nut torques.

3 min read

Comments

No comments yet. Be the first.

Leave a comment

Keep it about the bike. Corrections with a source are especially welcome.

Comments are read before they are published.