Voge DS625X
DS625X Torque specifications
Tightening torques by model, taken from the factory documentation. Always cross-check against your own manual.
This page lists bolt tightening torques. The DS625X engine itself produces 57 Nm @ 6,500 rpm. All specifications
Choose "Save as PDF" in the print dialog to keep a copy.
Wheels and brakes
| Fastener | Thread | Torque | Notes |
|---|---|---|---|
| Front wheel axle | M18 | 75Nm55.3lb-ft | - |
| Front axle pinch bolt | M8 | 18Nm13.3lb-ft | - |
| Front brake caliper to fork | M8 | 32Nm23.6lb-ft | - |
| Rear wheel axle | M20 | 105Nm77.4lb-ft | The maintenance chapter of the same manual states 95 Nm. Check before use. |
| Chain adjuster nut | M8 | 9Nm6.6lb-ft | - |
| Chain adjuster, between the two nuts | M8 | 22Nm16.2lb-ft | - |
Chassis and suspension
| Fastener | Thread | Torque | Notes |
|---|---|---|---|
| Swingarm pivot | M14 | 120Nm88.5lb-ft | - |
| Engine to frame | M10 | 55Nm40.6lb-ft | - |
| Rear suspension linkage (shock, linkages, frame and swingarm) | M12 | 60Nm44.3lb-ft | - |
| Front fork to steering stem | M8 | 18Nm13.3lb-ft | - |
Engine and exhaust
| Fastener | Thread | Torque | Notes |
|---|---|---|---|
| Rear brake pedal adjusting stud nut | - | 18Nm13.3lb-ft | - |
| Mirror stem bolt | - | 25Nm18.4lb-ft | - |
| Mirror lock nut | - | 40Nm29.5lb-ft | - |
| Rear shock damping adjuster | - | 14Nm10.3lb-ft | - |
These figures are published for reference and are not official Voge data. Confirm each one in the service manual for your model and model year, tighten with a calibrated torque wrench, and have a qualified mechanic do the work if you are unsure.
Source: Voge DS625X owner manual (EN edition), key fastener inspection table · Updated Sep 5, 2026
