Voge DS900X
DS900X Torque specifications
Tightening torques by model, taken from the factory documentation. Always cross-check against your own manual.
This page lists bolt tightening torques. The DS900X engine itself produces 95.0 Nm @ 6,000 rpm. All specifications
Choose "Save as PDF" in the print dialog to keep a copy.
Wheels and brakes
| Fastener | Thread | Torque | Notes |
|---|---|---|---|
| Front wheel axle | M20x1.5 | 65-75Nm47.9-55.3lb-ft | - |
| Rear wheel axle nut | M24x1.5 | 93-107Nm68.6-78.9lb-ft | - |
| Rear wheel connecting plate | M12x1.5 | 36-44Nm26.6-32.5lb-ft | - |
| Front brake caliper to fork | M10x1.5 | 36-44Nm26.6-32.5lb-ft | - |
| Rear brake caliper to swingarm | M8 | 27-33Nm19.9-24.3lb-ft | - |
| Brake hose banjo bolt | M10x1 | 31.5-38.5Nm23.2-28.4lb-ft | - |
| Brake disc bolts | M8x1.25 (10.9) | 31.5-38.5Nm23.2-28.4lb-ft | - |
| ABS hose bolt | M10x1 | 28.2-33.8Nm20.8-24.9lb-ft | - |
| Speed sensor ring screw | M5x1 | 4-5Nm3.0-3.7lb-ft | - |
Chassis and suspension
| Fastener | Thread | Torque | Notes |
|---|---|---|---|
| Rear subframe to main frame | M10x1.5 | 54-66Nm39.8-48.7lb-ft | - |
| Engine to frame | M12x1.75 | 67.5-82.5Nm49.8-60.8lb-ft | - |
| Steering stem locking nut | M35x1 | -Nm-lb-ft | Staged, two nuts: first nut 5.0 Nm, back off 1/4 turn, then 2.2 Nm; second nut 2 Nm, aligned with the groove. |
| Steering stem clamp bolt | M28x1 | 90-110Nm66.4-81.1lb-ft | - |
| Handlebar clamp bolt | M8x1.25 | 22-26Nm16.2-19.2lb-ft | - |
| Front fork to steering stem | M8x1.25 | 16.2-19.8Nm11.9-14.6lb-ft | - |
| Rear shock absorber mount | M12x1.75 | 54-66Nm39.8-48.7lb-ft | - |
| Side stand | M10x1.25 | 34-46Nm25.1-33.9lb-ft | - |
| Left rider footrest bracket | M10x1.5 | 36-44Nm26.6-32.5lb-ft | - |
| Right rider footrest bracket, upper | M12x1.75 | 85.5-104.5Nm63.1-77.1lb-ft | - |
| Right rider footrest bracket, lower | M10x1.5 | 36-44Nm26.6-32.5lb-ft | - |
| Pillion footrest bracket | M8x1.25 (10.9) | 27-33Nm19.9-24.3lb-ft | - |
Engine and exhaust
| Fastener | Thread | Torque | Notes |
|---|---|---|---|
| Exhaust header nut at the engine | M7x1 | 13.5-16.5Nm10.0-12.2lb-ft | - |
| Air filter housing bolt | M6x1 | 7.65-10.35Nm5.6-7.6lb-ft | - |
| Muffler section joint bolt | M10x1.5 | 30Nm22.1lb-ft | - |
| Muffler mounting bolt | M8x1.25 | 20-24Nm14.8-17.7lb-ft | - |
| Engine oil drain bolt, collection tray | - | 10Nm7.4lb-ft | - |
| Engine oil drain bolt, sump | - | 25Nm18.4lb-ft | - |
| Oil filter cartridge | - | 28Nm20.7lb-ft | - |
| Oil filter cover | - | 11Nm8.1lb-ft | - |
| Rear brake pedal adjusting stud nut | - | 18Nm13.3lb-ft | - |
Bodywork and fittings
| Fastener | Thread | Torque | Notes |
|---|---|---|---|
| Fuel tank mounting bolt | M8x1.25 | 20-24Nm14.8-17.7lb-ft | - |
| Tail luggage rack bolt | M8x1.25 | 20-24Nm14.8-17.7lb-ft | - |
| Crash bar bracket bolt | M8x1.25 | 20-24Nm14.8-17.7lb-ft | - |
| Left crash bar bolt | M8x1.25 | 20-24Nm14.8-17.7lb-ft | - |
| Right crash bar bolt, rear | M10x1.5 | 36-44Nm26.6-32.5lb-ft | - |
| Ignition switch screw | M8x1.25 | 16.2-19.8Nm11.9-14.6lb-ft | - |
These figures are published for reference and are not official Voge data. Confirm each one in the service manual for your model and model year, tighten with a calibrated torque wrench, and have a qualified mechanic do the work if you are unsure.
Source: Voge DS900X owner manual (EN edition), key fastener torque table and maintenance chapter · Updated Sep 5, 2026
